Bracelets, chains, unique pieces, cutlery, tea sets, jewelers … There are many silver objects that we can possess. Over time, they inevitably end up losing their luster and shiny silver color. Somehow it now looks matte, with an unflattering black trim. Have you thought about buying new pieces to re-feel the beauty of silver in your home or in your accessories? Do not do it! There is a way to make them look new in an inexpensive, simple and, above all, very ecological way. In addition, it can be done with little waste. In this Green Ecologist article we explain how to leave silver as new in an ecological way. Take note!
The entire process will not take more than a few minutes. The first thing to do is determine if the pieces are small or large because the system to do it varies slightly.
Although theoretically the trick that we are going to recommend for the small ones could also be done with the large ones, we suggest separating them.
You will only need:
Spread the piece of aluminum foil out bottom of container. For example, a glass oven dish will go very well - put all your silver jewelry or small objects on the aluminum foil.
Pour the hot water until just enough to cover all the jewels and add a tablespoon of baking soda. If you have many pieces, maybe you should add a little more, but in principle one is enough.
You will see how they are formed small bubbles during the process. That will mean that everything is going well, since the necessary chemical reaction is taking place that will make it possible for your objects to look like they just came out of the jewelry. For this reason, due to the vapors and odors caused by this chemical reaction, we recommend doing it in an outdoor space, on the balcony or in your garden, for example.
Now it is necessary to let it rest for a while. At least 15 minutes even 30 to take effect. Once that time has elapsed, take all your objects, drain them lightly and place them on a smooth kitchen cloth, extended on desk. The leftover water can be flushed down the toilet. This will allow you to take advantage of it to clean it. Preserve the aluminum foil with traces of baking soda.
You will have observed how your jewels already have another color, how the black surround has disappeared and the matte tone has given rise to a precious shine. However, the next step is to dry them well, one by one, with the cloth, rubbing them.
If any stains are very persistent (it can happen in the case of very old jewelry that has not been cleaned in years), take a little of the baking soda Wet excess in the aluminum foil and rub it with your fingers (it is better to use gloves) and you will remove any possible stains. Once dried with the cloth, you will see the big difference and you will have obtained jewels that seem new with a very simple trick.
The procedure is very similar. All we have to do is either dip a clean cloth in the preparation that we have used for the jewels (if they are not too blackened) or prepare one of the same in a container or sprayer. If you prefer, add a splash of vinegar or lemon. This mixture can give rise to fumes or even strong odors, so take advantage of the summer to do it on the balcony or in your garden.
Then you just have to rub well with it rag on the pieces of silver.
Another trick that works is to wash the object well with soap and water, smear a little toothpaste and rub with the cloth with all our desire. Afterwards, we wash again under the sink tap well with soap and water. And we polish with the cloth.
With these little tricks, you tarnished silver it will regain the shine and beauty it had a few years ago. You will see how it is very simple and, in addition, very ecological.
If you want to read more articles similar to How to leave silver as new in an ecological way, we recommend that you enter our category of Other ecology.