Certifying technicians have been waiting for this news for a long time due to the widespread use in the home certification sector of the CE3X program. Officially, you can now use the CE3X before the certification of new construction buildings. Take note!
So far, the program has been advancing in its multiple versions and with an important variety of complements (Example; Complement measures for improvement in the envelope and its potential) that year after year provide new capabilities to facilitate the daily task of the certifying technician, but we only continued working on all types of existing buildings without power prepare reports on new construction.
As we can see in the following image from the Ministry of Industry in its section «Registration of Recognized documents: Procedures for the certification of buildings»The following update has been released:
With this new expansion of the capabilities of the certification program that are processed through a complement that we will have to add, we can now certify:
In order to practice the new construction certification we are going to need install a plugin which will extend the utility of the program. This complement is provided by the company that manages the CE3X software, which is Efinovatic.
The use of CE3X for the certification of new buildings is practically similar to the
of existing buildings, although as is evident there are some restrictions regarding the scope of the certification. Manual access from HERE.
Of course, we have to have the latest version of CE3X installed whose operating needs are:
Once we have the latest version of CE3X installed (As of this article, we are in Version 2.3). We will have to download the plugin installer and run it (preferably with CE3X closed). Later, when you re-enter the program, the option "Energy certification of new buildings" will appear in the "Accessories" menu.
It can access both the latest version of CE3X and the new add-on or its manual from HERE from the Ministry of Industry itself. (Lower the cursor and go to the section "Supplement to the CE3X program for the energy certification of new buildings"):
As indicated by the Ministry of Industry, all inquiries about this new complement are sold practicing via [email protected]
All types of existing buildings can be certified:residential, small tertiary and large tertiary. Without good, fornew buildings, can only be used beforeresidential buildings and thesmall tertiary buildings, remaining out of reach of CE3X only the new large tertiary buildings. It is understood that small tertiary is one that has an installed thermal power of less than 70 kW.
The program itself will check if the conditions and limitations are met. In the event that any of the circumstances that prevent the issuance of the certificate is breached, the program will notify you with a Notice:
Beware! Even if a Notice appears, it will let us continue, because there is a possibility that it is certifying the certificate for a small premises or office that is connected to a boiler that serves the entire building.
It must of look at the manuall given that There are different conditions on the envelope that we have to certify and in it, it is explained in detail.
In the final result of the report we would have:
If you liked this article, share it!